Why We Do We Love Double Glazing Seal Repairs (And You Should, Too!)
Double Glazing Seal Repairs
When double glazing window seals are broken they can cause mould and damp. This could cause damage to the frame and walls surrounding it, in addition to affecting your health.
Fortunately, the majority of uPVC windows can be repaired using sealing and resealing instead of replacing. A glazier can clean the frame and the glass of the window. They will apply a new bead, and smooth it.
Water Leaks
Window seals are made to keep moisture out of your home. However, when they begin to break down, it could result in water leaks around your windows. Not only is a leaking window irritating, but it can cause costly damage to the structure of your home. It is crucial to spot the issue early and get it fixed by a professional before it gets any worse.
The most common cause of your windows that leak is not the glass itself, but on the frame and sill. A leak in this area is the most typical sign of a failed window seal. This can be caused by damage to the seal caused by weather or age wear-out caulking, or even a blocked drain section which can lead to the accumulation of water or ice.
Another indication of a failing window seal is the appearance of water between the panes of your double glazed windows. This is not as dangerous as a leak of water since the water doesn't travel as far to get into your home. However, it does mean that the inert gases that are encased between your windows have escaped out. This can lower the insulation value of your window.
The final sign of a damaged window seal is condensation that forms between the panes. It could be the result of an ineffective window seal or it could be due to an unforgiving climate in your home or a problem with the glass. The condensation may not only be unpleasant, but it could also cause the growth of mould and mildew in your home which can be very difficult and expensive to eliminate.
It's time to check your double-glazed windows if observe these indications. Repairing or replacing your windows will protect your home against water leaks, reduce the cost of energy and eliminate draughts. It's a small expense to pay for your family's safety and comfort. Contact Thompson Creek Window to discuss your options for window seal replacement or repair. Our professionals are always happy to help! We offer assistance to homeowners in the Mid-Atlantic.
Condensation
A broken double-glazing seal may allow water to enter the space that is insulating. This can lead to fogging or misting to the window panes.
If double glazing repair near me see condensation forming within your home, it's the perfect time to contact an experienced double glazing repair service. The condensation is a sign that the seal created at the factory has failed and water is leaking into the gap between the insulated and non-insulated.
Condensation can be caused by number of causes however, the most common cause is gaskets, sealants or insulation in the uPVC frames of the windows. There are a variety of options for repairing double glazing seals, but it's important that the new seals are properly sized in order to ensure the best seal and a snug fit.
Gaskets are usually made of polyurethane, which is a material that can be used to seal gaps between double-glazed units. They are designed to last for a long time but they are susceptible to deterioration as time passes due to natural wear and tear and exposure to various temperatures and weather conditions throughout the year.
Over time, the foam may shrink or crack over time. This could lead to cracks in the seal and allow moisture to enter the double-glazed window. This causes condensation but it can also result in an increase in energy efficiency, which means that you're losing heat from your home to outside air.
Re-sealing the windows is one option to address this issue. This is not a sure solution since it will only remove the existing condensation, and not address the issues that are causing the double-glazed window to leak or create condensate.
A professional who is able to provide an insurance-backed warranty should replace your windows in full. If the company fails, you are still protected by insurance. It is important to note that the warranty on your replacement windows must be at least 10 years.
Misting
As the autumn months approach, it's a good idea to make sure that your double glazing seals are in good shape. Seals that have worn out can affect your windows' insulative properties as well as cause condensation, mold and dampness. It is essential to address any issues in your double-glazed windows as soon as possible to avoid further damage and save on energy bills.
A standard double glazed window is constructed from two glass panes connected by an internal space filled with gas. A layer of sealant on the outside fills the gap between the uPVC frame and the glass. This is vital to ensure the air-tight seal that keeps warm and cool air separate in your home which will save you money on heating bills. However, over time, these seals can be damaged due to aging or weather conditions, or even inadequate installation. After this, the magic insulation formula that makes your double glazed windows so effective can begin to lose its effectiveness.
If left unchecked leaks, damaged seals, or other issues can lead to condensation and damp which will not only ruin the appearance of your windows, but can also impact your health. Damp and mould not only causes damage to your floors, walls and ceilings, but also cause allergens and irritants within your home that could be harmful to your health and your family's health.
One of the most common problems that can arise with your double glazing is that it can leak in between the panes. This occurs when moisture gets inside the insulated section of your windows. It can be difficult to repair without professional double glazing repair.
There are DIY ways to tackle this issue, however, we'd advise against it because it's not just risky but can be extremely hazardous and damage your windows. These methods involve drilling into the glass unit and applying chemicals to eliminate fog and condensation. This can lead to many problems, most notably exposing your windows to water damage that can ruin the unit altogether.
Professional glaziers possess the tools, skills and experience necessary to properly reseal uPVC frames. They also can provide you with lasting results. They can also give you advice on how to maintain your uPVC window to avoid problems in the future.
Draughts
A draught from your window is a sign that the sealant has been damaged and must be replaced or repaired. This will stop the cold air getting into your home, increase efficiency in energy use and lower heating costs and increase comfort levels and indoor temperature control.
It is important to remember that some draughts are not caused by the window seals but rather from the gap between the bricks' frames. In some instances, it can be possible to repair this by filling the gap with silicone caulking. If this does not work, you will require the seal to be professionally repaired.
When the sealant around double-glazed windows begins to fail, it allows water ingress. This can result in damp or even mold. This can affect health and can cause damage to the property. If you notice any problems with water ingress and you want to deal with them as soon as possible. If your windows are still covered by a guarantee you should find out if the company that sold them will cover the cost.
The windows themselves are typically covered by a warranty that can be 10 years or more, but certain businesses offer lifetime warranties - so it is worth checking this information out. If your double-glazed windows are under warranty, it's worth contact the company you bought the windows from as soon as possible and providing them with the details of any issues you are having. It is best to contact the company in person, or by letter and email. This will ensure that everything is documented and clear.
It is also important to remember that draughts are often caused by faulty hinges, not an ineffective seal. The hinges are responsible for closing the window sash (the section that you open) but they can also become stiff over time if they are not regularly oiled. This could cause a gap be created between the sash frame and the sash, allowing cold air into the house. Replacing the hinges will fix this issue, without affecting window seals.